RT-N66U Bandwidth Limiter ?s

Discussion in 'Tomato Firmware' started by Papa Legba, Oct 10, 2017.

  1. Papa Legba

    Papa Legba Network Newbie Member

    I have an RT-N66U, trying to set bandwidth limits per IP or MAC address.

    All default settings once flashed/NVRAM wiped on flash.

    Set up IP or MAC for filtering, but as soon as I check Bandwidth Limiter for LAN (br0) to enable it...it completely kills any connection to the internet wired or wireless...

    QoS is not turned on.

    Flashed Tomato/AdvancedTomato v132, 136, 138 and 140.

    Same results with all.

    Enabling B/W Limiter immediately kills any access to the internet, wired and wireless.

    Tips/suggestions/thoughts?

    TIA
    Jim
     
  2. jbktomato

    jbktomato Serious Server Member

    Jim, I too am having this issue with Advanced Tomato using/trying multiple versions on both an ASUS RT-N66U and a RT-AC66U. I have a RT-N16 running AT 3.4 140 with no issues.

    Did you figure out a solution?

    I've tried everything and can't figure out why simply checking bandwidth limiter will instantly kills access to the internet connection, both via WiFi or wired. Once I uncheck bandwidth limiter and hit save, I instantly have internet access using WiFi or wired.

    Thank you in advance...JON
     
    Last edited: Sep 26, 2018
  3. jbktomato

    jbktomato Serious Server Member

    Wow, pushing a year since Jim (Papa Legba) posted this issue and no one besides myself and him has encountered this issue. Any and all help would be appreciated.
     
  4. AndreDVJ

    AndreDVJ LI Guru Member

    Does /etc/qoslimit get generated?
     
  5. jbktomato

    jbktomato Serious Server Member

    AndreDVJ, thank you for your reply... Where would I look to see if /etc/qoslimit gets generated?
     
  6. Monk E. Boy

    Monk E. Boy Network Guru Member

    You would normally do it over a telnet or ssh session. You could also do it via the website in the commands section of tools, like cat /etc/qoslimit then execute, or ls -l /etc and then execute. At least I think it's tools and then commands, it's been forever since I used it. Also this is under normal Tomato, no idea if its still in the same spot in AT because I've never installed AT (nor am I likely to ever do so).
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice